ES1008MTP3
8-port 10/100/1000 Mbps tap-type Gigabit Ethernet Switch.
ES1008MTP3 is an Ethernet switch equipped with 8 10 / 100 / 1000Mbps ports. Equipped with a loop detection function The loop detection function can be selected for each port with the button on the side of the main unit. In addition, MDI / MDI-X and communication speed for each port are also bogged down. It can be set easily. It also supports auto-negotiation, depending on the port you connect to. Communication speed and communication method can be set automatically.
- 8-port switch compatible with 10BASE-T (IEEE802.3)/100BASE-TX (IEEE802.3u)/1000BASE-T (IEEE802.3ab).
- Supports jumbo frames (Maximum 9,216 bytes)
- Supports entries for 4096 MAC addresses
- Flow control: Supports IEEE802.3x (at full duplex) and back pressure (at half duplex)
- EAP / BPDU / dot1q VLAN / QinQ / LACP transparent
- Supports buzzer sound and port shutdown when loop is detected
- Equipped with private function by DIP switching
- Equipped with packet flatting mode by DIP switching
- Quiet design with fanless
- VCCI class B compliant
- RoHS compliant
ES1008MTP3
Spec
| Models | ES1008MTP3 | |
|---|---|---|
| Standards | IEEE802.3, IEEE802.3u, IEEE802.3x, IEEE802.3ab | |
| Data Transfer Speed | 10/100/1000Mbps | |
| Ethernet Ports | 10BASE-T/100BASE-TX/1000BASE-T（Auto MDI/MDI-X function settings） | |
| 8 | ||
| Duplex | Full/Half | |
| Auto Negotiation | Supported | |
| Features | Switching Mode | Store & Forward Method |
| Throughput | 11.9Mpps(64byte) | |
| Switching capacity | 16Gbps | |
| Buffer architecture | Dynamically allocated to each port | |
| Buffer Size | 512Kbyte/unit | |
| MAC Address | 4K(self-learning) | |
| Aging time | 300sec | |
| Flow control | full-duplex IEEE802.3x half-duplex Back pressure |
|
| Others | Jumbo Frame(9,216bytes), EAP/BPDU transparent, dot1q VLAN, QinQ, LACP transparent, HOL blocking prevention, Loop detection (Notify by LED / buzzer sound, Automatic recovery 180 sec, frame interval 1 sec), Packet flatting mode function Private function, reset function) mode | |
| Power supply | Rated input | AC100-240V, 50/60Hz |
| Maximum input current | 0.08 A | |
| Maximum power consumption | 3.9W | |
| Maximum calorific value | 3.36 Kcal/h | |
| Required Humidity & Temp. | During Operation | 0℃～50℃/15%～90% Non-Condensing |
| During Non- Operation | −40℃～70℃/90% or less Non-Condensing | |
| Cooling method | Fan-less | |
| Size | 225(W)x70(D)x30(H) mm | |
| Weight | 550g | |
| Compatibility | VCCI Class B / RoHS Directive compliance / MTBF 90,250 h | |
| Included items | Main unit, power cable for AC100V, installation guide,Warranty | |