FXCX5512PE
Layer 2+ multi-gigabit switch with PoE management function
"FXCX5512PE is a multi-gigabit compatible L2+PoE switch with 8 ports of 100M/1G/2.5G/5G/10G and 4 slots of 1G/10G SFP+. Equipped with a static routing function, security is ensured through stable network management.In addition, since it supports multi-giga and allows the use of existing cables, schools, offices, factories, and various other facilities can achieve faster LAN speeds without the cost and effort of changing cables. It supports PoE++ (up to 60W per port) and is ideal for connecting to products with high-speed networks and high power consumption, such as high-resolution IP cameras and WiFi 6.
FXCX5512PE
Features
- Equipped with 100M / 1G / 2.5G / 5G / 10G x 8 ports, SFP / SFP + (1G / 10G) slot x 4 ports
- Compliant with IEEE802.3af / at / bt Supports 60W per port and can supply up to 420W for the entire device
- Supports jumbo frames (10,240bytes)
- Supports 240 Gbps switching capacity
- 32,768 MAC address entries, Supports 192 ARP entries
- Provides security functionality with IEEE 802.1x port authentication
- IGMP and MLD snooping provide advanced multicast filtering and networking
- Supports static routing function
- Supports each management function such as SNMP
- 802.3ad Link Aggregation (LACP) supports load balancing of traffic
- Supports STP (IEEE802.1d compliant), RSTP (802.1w compliant), MSTP (802.1s compliant)
- CoS/DSCP setting is possible, QoS scheduling, and policy-map (CBWFQ) are supported,allowing flexible traffic policy settings using QoS
- Support ARP inspection, IP source guard, control unauthorized access
- Energy saving IEEE802.3az compliant EEE power management compatible
- RoHS compliant
Spec
| Models | FXCX5512PE | |
|---|---|---|
| Standards | FIEEE802.3an XC 5218 、IEEE802.3bz、IEEE802.3ab、 IEEE802.3u、IEEE802.3x、IEEE802.1d、IEEE802.1w、 IEEE802.1s、IEEE802.1p / IEEE802.1p-DSCP、 IEEE802.1Q、IEEE802.3ad、IEEE802.1X、 IEEE802.3af/at/bt、IEEE802.3az(EEE) | |
| Ethernet Ports | 100M/1G/2.5G/5G/10G RJ45 | 8 |
| 1G/10G SFP+ | 4 | |
| AutoMDI/MDIX | Supported | |
| AutoNegotiation | Supported | |
| Autoflow control | Supported | |
| Switching Mode | Store & Forward Method | |
| Applicable cable | 10GBASE-T | Category 6A and Up(UTP/STP) |
| 2.5G/5GBASE-T/1000BASE-T | Category 5e and Up(UTP/STP) | |
| 100BASE-TX | Category 5 and Up(UTP/STP) | |
| Transmission distance | Up to 100m (UTP) | |
| Transmission speed | 100M/1G/2.5G/5G/10G | |
| Jumbo frame size | 10,240Byte | |
| Total throughput | 178.57Mpps | |
| Switch fabric | 240Gbps | |
| Frame buffer | 2MB | |
| Flash memory | 128MB | |
| MACAddress Table | 32,768 | |
| PoE function | Power supplyport | 8 |
| Maximum power supplycapacity | 420W | |
| Power supplyPIN assignment | Alt- A:1&2(-)/3&6(+) AltB:4&5(+)/7&8(-) | |
| L3 function | Static Routing | |
| Loop detection | detection | Supported |
| guard | Due to spanning tree functionality | |
| cut off | Supported | |
| automaticrecovery | Supported | |
| storm control | broadcast | Supported |
| multicast | Supported | |
| Unicastcompatible | Supported | |
| Spanning tree | IEEE802.1D STP、IEEE802.1w RSTP, IEEE802.1s MSTP | |
| Traffic priority | CoS/802.1p, DSCP, policy map (CBWFQ) 8 levels of priority queuing, congestion avoidance | |
| Multicast | IGMP v1/v2/v3、IGMP Snooping、MLD、 MLD Snooping v1、Multicast routing、MVR (GVRP) | |
| Time synchronization | SNTP | |
| Security | 802.1X authentication, Dynamic/Guest VLAN, MAC base authentication, MAC address filtering, Port security, ACL, IPv4 ACL, IPv6 ACL, web redirect authentication, DHCP Snoopy IPv6 DHCP Snooping, IP Source Guard, IPv6 source guard, DoS protection | |
| Management | Web management, CLI, Telnet/ssh, SNMP (v1/v2c/v3), RMON, Syslog | |
| LED display | PWR | Power normal: Green on/Rebooting: Green flashing/Power OFF: Off |
| Fault | Error occurring: Orange light on/Normal operation: Light off | |
| PWR MAX | PoE power supply MAX: Lit orange PoE power supplyavailable: Off | |
| LAN mode | Operating in LAN mode: Solid greenOperating in PoE mode: Off | |
| PoE mode | Operating in PoE mode:Solid greenOperating in LAN mode: Off | |
| Mode (RJ45port LED) | Link established at 10Gbps: Lit green (in LAN mode)PoE power supply in progress: Lights green (in PoE mode) Link established at 100M/1Gbps: Lights orange (in LANmode) | |
| Link/Act (RJ45port LED) | Link established: Green on Sending/receiving data: Flashing green or orange Link not established: Off | |
| Speed (SFP+port LED) | Link established at 10Gbps: Lights greenLink established at 1Gbps: Lights orangeLink not established: Off | |
| Link/Act (SFP+port LED) | Link established: Green on Sending/receiving data: Flashing greenLink not established: Off | |
| Power supply | Rated input | AC100-240V, 50/60Hz |
| Maximum input current | Maximum load and with PoE: 5.5AMaximum load and no PoE: 0.4 A | |
| Maximum power consumption | 550w | |
| Maximum calorific value | With PoE: 112 kcal/hWithout PoE: 30.1 kcal/h | |
| energy saving law | Energy consumption efficiency | 0.291 W/Gbit/s |
| classification | A | |
| Maximum effectivetransmission speed (Gbit/s) | 120 Gbit/s | |
| Energy savinglaw standards compliance | PASS | |
| Energy saving achievement rate | 599％ | |
| Size | 230(W)x330(D)x44(H)mm | |
| Weight | 2.60 kg | |
| Required Humidity&Temp | During Operation | 0℃～+50℃/5%～90% Non-Condensing |
| During NonOperation | -40℃～+70℃/5%～95% Non-Condensing | |
| cooling function | Cooling by fan | |
| Adaptation of EMI | VCCI Class A | |
| Reliability | MTBF 105,665 h | |
| Supplies | Installation Guide＆Warranty*1 Power cable for AC100V*1, Rack-mount kits*1, console cable*1, Rubber Feet 4 pcs | |