FXCX9526F

20 slots of 1G/10G SFP+ and 4 slots of 10G/25G SFP28. L3 switch with management function that can install 2 slots of 40G QSFP+

"FXCX9526F" is equipped with 20-port 1G / 10G SFP +, 4-port 10G / 25G SFP28, and 2- port 40G QSFP +.It is an L2 + switch with a management function. Each high-performance function supports layer 2 functions as well as dynamic routing (RIP,).

It also supports layer 3 functions such as RIPng, OSPFv2, OSPFv3) and VRRP. Also,, the stacking function makes it possible to build equipment redundancy in a spacesaving manner of 1U size, which makes it fault tolerant. You can build a high network. In addition, since the supported speed is 1G / 10G / 25G / 40Gbps and multi-rate, from large-scale network consolidation to medium It supports various needs such as small network cores.

View

FXCX9526F

Features

Equipped with 1G / 10G SFP + x20 ports, 10G / 25G SFP28x4 ports, and 40G QSFP + x2 ports.
Supports 32000 MAC address entries
Maximum 4000 dynamic routes can be learned
Supports management console port and in-band management (SNMP / HTTP / HTTPS / Telent / SSH)
Supports USB backup
RIP and OSPF are standard equipment for dynamic routing
Supports IPv6 management and IPv6 routing
Supports redundant system by VRRP
Equipped with ITU-T compliant ring protocol for smart redundant configuration
Loop detection by link detection function, fiber transmission / reception down detection
Equipped with IPv4 / IPv6 ACL and MAC ACL, L2 to L4 level packet control is possible in the in / out direction
Supports CoS / DSCP, QoS scheduling, Policy-map (CBWFQ), and flexible traffic policy by QoS, Can be set
Supports ARP inspection and IP source guard functions, access control of unauthorized users and ARP spoofing Countermeasures against attacks are possible
Energy saving IEEE802.3az compliant EEE power management compatible

Spec

Models		FXCX9526F
Standards		IEEE802.3ba 、 IEEE802.3by 、 IEEE802.3cc 、 IEEE802.3ae 、 IEEE802.3z、IEEE802.3x、IEEE802.1D、IEEE802.1w、IEEE802.1s、 IEEE802.1p、IEEE802.1Q、IEEE802.3ad、IEEE802.1X
Ethernet Ports		1G/10G SFP+×20 10G/25G SFP28×4 40G QSFP+ ×2
	Duplex	Full/Half
	Auto Negotiation	Supported Correspondence (Communication speed and Full / Half can be fixed for each port)
Features	Switching Method	Store & Forward Method
	Throughput	565Mpps（64byte）
	Switching Capacity	760Gbps
	Buffer Size	4.0Mbyte
	Flash Memory	Flash: SPI 1MB / RAM: DDRⅡ 1MB
	MAC Address Table	32,000
	VLAN	VLAN(ID1-4094), 802.1Q VLAN Tagging, 802.1QVLAN Tag Q-in-Q,GVRP, Port-based VLAN,Private VLAN, Multiple Uplink Port(Isolated, Community,Multi Grouping),Voice VLAN
	Port Trunk	Static 8 ports (Max)LACP 128 Group (Max)
	IP Multicast	IGMP v1/v2/v3、IGMP Snooping v1/v2/v3、MLD、 MLD Snooping v1/v2、Multicast routing
	Spanning Tree	IEEE802.1D STP, IEEE802.1w RSTP,IEEE802.1s MSTP
	QoS	CoS/802.1p、DSCP、Policemap(CBWFQ)、Priority Queuing、Congestion Avoidance
	Port configuration	Speed/Duplex, HOL, configuration, Flow Controller, Port Status
	Jumbo Flame	9,216bytes (Max)
	L3	RIP/RIPng、OSPFv2/OSPFv3、ECMP、 IS-IS/IS-ISv6、BGP/BGP+4、BFD、Static Routing、VRRP、PBR、DHCPRelay、IPv6 DHCP Relay、Ping IPv4/v6、Traceroute IPv4/v6、ICMPv6、VRF、MPLS
	Management	Web management,Web management authentication, Console management, management port, Baud Rate,Telnet,Telnet v6
	Security	IEEE802.1X, Dynamic/Guest VLAN, MACbased authentication, MAC address filtering, port security, ACL, IPv6 ACL, web redirect authentication, DHCP snooping, IPv6 DHCP snooping, IP source guard, IPv6 source guard, ARP inspection SSH v1/v2, SSHv6, HTTPS, DoS protection, CPU protection
	Others	DHCP server (IPv4), DHCP client, port mirroring
Power	Rateinput voltage/frequency	AC100-240V, 50/60Hz
	Maximum input current	0.83 A (AC100V)
	Maximum power consumption	81.2W
	Maximum calorific value	69.8 kcal/h
Required Humidity&Temp	During Operation	0℃～50℃/10%～90% Non-Condensing
Required Humidity&Temp	During Non- Operation	-40℃～+70℃ / 5%～95% Non-Condensing
Size		440(W)x330(D)x43.6 (H) mm
Weight		5.17kg
Standards		VCCI Class A