LE2852 series
- LE2852-005 RJ45 to 550m MMF(SC)MC
- LE2852-10 RJ45 to 10km SMF(SC)MC
LE2852-005/10
Features
- A media converter that converts a 10/100/1000BASE-T port to 1000BASE-SX/LX.
- Equipped with auto-negotiation and MDI/MDI-X mode automatic setting function.
- The DIP switch enables manual setting for speed/half duplex/full duplex /auto-negotiation.
- The DIP switch enables manual setting for LFP (Link Fault Pass-through) OFF/ON.
- Display with various LEDs on the front panel.
- Usable as a stand-alone device and as a card-type, chassis-containing device.
- In the case of the use of a product housed in a rack, the hot-swap function is provided.
- Supports bandwidth control function.*
- Remote power outage notification (dying gasp).*
- Reference of RMON counter.
- Tag frame/QinQ double-tagged frame/EAP/BPDU transparent.
*LE2020 or LE2002 and LE2930 required.
Spec
| Models | LE2852-005 | LE2852-10 | |
|---|---|---|---|
| Standards | IEEE802.3、IEEE802.3u、IEEE802.3ab、IEEE802.3z | ||
| Transmission speed | 10/100/1000Mbps(CSMA/CD) | ||
| Ethernet Ports | 10BASE-T/100BASE-TX /1000BASE-T | 1port(MDI/MDI-X auto switch) | |
| Duplex | Full/Half | ||
| Auto Negotiation | Supported | ||
| Transceiver | 1000BASE-SX x1port | 1000BASE-LX x1port | |
| MMF 220m～550m/SC connector | SMF 10km/SC connector | ||
| Wavelength | MMF 850nm | SMF 1310nm | |
| Output | -9.5dBm～-4dBm | -9.5dBm～-3dBm | |
| Receiving sensitivity | -17dBm～-3dBm | -20dBm～-3dBm | |
| Communication function | link fault pass through(LFP) (Default:OFF) | ||
| Transmission mode | Switching mode | ||
| Maximum frame size | 1632byte | ||
| Rated input voltage/frequency AC power |
AC100V／50/60Hz | ||
| Maximum power consumption | 5.0W | ||
| User Environmental | Operating Temperature /Humidity | 0℃～50℃/10～90％ (no condensation) | |
| Dimensions | 88mm(W) ×139mm(D) ×23.5mm(H) without detachable parts |
||
| Physical specification | 398g (without AC adapter) | ||
| Accessories | AC adapter、product warranty | ||